Priority
From English DMXCWiki
As additional method beside HTP and LTP mode to control the Mixer channels DMXControl uses the priorities of tools. Priorities are preset presently solidly and are not configurable. A higher number means higher priority. The corresponding priority is shown in the Channel overview in the lower part:
- 0 - Channel overview
- 0 - Grafical view (in case of no own Mixer channel)
- 0 - Submaster tool
- 0 - Command box
- 0 - Audioplayer
- 0 - Soundanalyser
- 2 - Effectsequenzer
- 3 - Scene list tool
- 255 - Commandline tool
- 255 - Grafical view (in case of own Mixer channel)
The Effect is the following:
- The altering of DMX value of a tool with higher priority pushes through opposite a tool with lower priority resp. the later tool has no influence. In the Submaster or in the Channel overview (always smallest priority), you can recognizes that by it that the blue beam doesn't follow the alterations of the slider.
- If the " Reset Changes " button is pressed in the graphic view in the popup menue or the graphic view is closed, so the priority will put back on zero and another tool can become generally accepted.
The behaviour is analogous with other tools with higher priority. . In the Submaster or in the Channel overview (always smallest priority), you can recognizes that by it that the blue beam take value of the sliders. This value is now send to the mixer.
- Tools with same priority behave synchronized, whereby in dependence of HTP setting the highest value pushes through.
