Magic Visualizer
From English DMXCWiki
Contents |
Magic 3D Easy View by Sunlite
Description
DMXControl is MEVP (Magic 3D Easy View protocol) compatible and can be used together with the restricted version of Sunlite's "Magic 3D easy view" for FREE. Magic 3D Easy view is a 3D-Visualizer for your DMX show.
If you buy the Sunlite DMX-IN interface to visualize any DMX console you have access to advanced Features like video, 2D plans, etc...
Additional product information on Sunlite interfaces is available here: [Sunlite]
Installation
To use the demo Visualizer on your PC, you load the file Magic.exe of www.nicolaudie.com. Download: [Magic.exe].
Afterwards you install this tool e.g. under C:\Programme\SLMEV.
The Visualizer gets connected to DMXControl about an Output plugin. The corresponding file Sunlite MEVP.out.dll must be available in the installation folder of DMXControl (it is usually delivered by DMXControl with the set-up).
In the next step you must activate this Plugin under Plugin administration: SUNLITE MEVP (Visualizer) Over the button "Configure chosen Plugin" the installation directory of Magic 3D Easy view can be specified. The Visualizer should be started per default by DMXControl after a restart now.
If the Visualizer doesn't start automatically, then the MEVP.dll may need to be updated. Download: [MEVP.dll].
Operation
For the operation of the Visualizer please have a look into the EasyView manual, which you also can download on the web page www.nicolaudie.com: [[1]]. Take into account, an exchange of the data of the equipment Configuration between the two tools does not happen, only an exchange of the DMX signals is carried out. The Configuration of the equipment must independently and manually be carried out in the Visualizer.
As an example the stage is shown from our hosh demo video in the following picture.
