From English DMXCWiki
[general]
version=2.11
date=110407
[frmAddDevice]
frmAddDevice.Caption=Add device
Label5=Reading device definitions...
Label1=Quantity:
Label2=First address:
Label3=Name:
Label4=Address gap between devices:
cmdOK=OK
cmdCancel=Cancel
[frmAudioPlayer]
frmAudioPlayer.Caption=Audioplayer
frmAudioPlayer.optMode(0).ToolTipText=Standalone
frmAudioPlayer.optMode(1).ToolTipText=controlled by WinAmp
frmAudioPlayer.chkPlay.ToolTipText=Play
frmAudioPlayer.cmdRew.ToolTipText=Rewind
frmAudioPlayer.chkLoop.ToolTipText=Repeat
frmAudioPlayer.chkPrelisten.ToolTipText=prefade listening
Label3=Zoom:
chkNoVisData=Do not load waveform
lblTimeCode=Timecode:
Label1=Tracks:
Label2=Audio File:
cmdOpenFile=Open
chkActive=Active
cmdManage=Manage
frmAudioPlayer.cmdReTime.ToolTipText=Update position
frmAudioPlayer.cmdReset.ToolTipText=Reset
frmAudioPlayer.picWaveForm(0).ToolTipText=-
frmAudioPlayer.picWaveForm(1).ToolTipText=-
[frmAudiomanager]
frmAudiomanager.Caption=Audio manager
[frmBeat]
frmBeat.Caption=BeatTool
Label5=BPM
cmdSync=Sync
frmBeat.optSource(0).Caption=Manual
frmBeat.optSource(1).Caption=WinAmp AVS Plugin
frmBeat.optSource(2).Caption=BPM Studio
frmBeat.chkFilter.Caption=Limit to 250 BPM
chkFromAnalyzer=From Sound Analyser
cmdTap=Tap
Label1=Host:
Label2=Query interval:
Label3=BPM:
cmdReset=Reset
lblBPM=0 ms / 0 BPM / 0%
[frmButtons]
frmButtons.Caption=Command Box
chkProgMode=Programming mode
Label1=Buttons per row:
Label2=Rows:
cmdResetButton=Reset button
[frmChannels]
frmChannels.Caption=Channel view
cmdDirection=Out
[frmCheckDevice]
frmCheckDevice.Caption=Restore device association
Label1=The following cue entry could not be associated with a device. Perhaps the original device was deleted. Please choose how you would like to proceed:
Label4=ID of the device:
Label2=Cue name:
Label5=Start address (estimated):
Label3=Stored DMX channel:
cmdOK=OK
frmCheckDevice.lblAdress.Caption=Address
frmCheckDevice.lblChannel.Caption=Channel
frmCheckDevice.lblGUID.Caption=GUID
frmCheckDevice.lblName.Caption=Name
[frmCommandParser]
frmCommandParser.Caption=Command line
[frmCommandManager]
frmCommandManager.Caption=CommandManagerHelper
frmCommandManager.mnuFlags.Caption=Popup ""Flags""
frmCommandManager.mnuFlagsAskValue.Caption=Ask for value
frmCommandManager.mnuFlagsIgnoreZero.Caption=Ignore value 0
frmCommandManager.mnuFlagsOverride.Caption=Use specified value
frmCommandManager.mnuFlagsToggle.Caption=Toggle mode
[frmConfig]
frmConfig.Caption=Program Settings
frmConfig.tabMain.Tabs(1).Caption=General
frmConfig.chkApplyAllChangesToSelectedDevices.Caption=apply values from all sources to selected device
frmConfig.chkEffectGroupNamesRightAligned.Caption=align group names right hand
frmConfig.chkNoWarnOnSaveAll.Caption=No warning, if all channels should be saved
frmConfig.chkShowColorCircle.Caption=use presentation of color instead graphic
frmConfig.chkShowDeviceName.Caption=show device name and address
frmConfig.fraSoundAnalyzer.Caption=Sound analyzer
frmConfig.lblSource.Caption=source:
frmConfig.optSoundAnalyzerSource(0).Caption=VBVis-Plugin
frmConfig.optSoundAnalyzerSource(1).Caption=AVS plugin
fraPerformance=Performance
lblSpecInterval=Refresh interval for spectrum analyzer:
chkDisableRepositoryBackup=Disable automatic saving of cue library
fraView=View
lblFontSize=Font size for zoomed views:
Label1=pt.
chkShowValuesAsPercent=Display DMX values in percent
fraStartup=Program startup
lblStartupCommand=Execute command on program start:
cmdEditStartupCmd=Define
chkCGListsGlobal=Save color and gobo lists globally
chkScrollBlink=Flash "scroll lock" LED on beat
frmConfig.tabMain.Tabs(2).Caption=Graphical view
fraPopups=Device popups
frmConfig.optPopupOpen(0).Caption=Open when hovering over the icon
frmConfig.optPopupOpen(1).Caption=Open after clicking the icon
lblPopUp=Close after:
fraSymbols=Icons
lblSymbolSize=Size:
Label5=px
chkZoomSymbols=Change size when zooming
frmConfig.tabMain.Tabs(3).Caption=Cues/Chasers
fraScene=Cues
lblEntryPoint=Default set point for non-fading channels:
fraEffects=Chasers
chkStartEffectOnDblClick=Start chasers on double click
chkUngroupedEffectsAsGroup=Treat ungrouped chasers as separate group
frmConfig.tabMain.Tabs(4).Caption=Tools
frmConfig.tabMain.Tabs(5).Caption=Output
fraMixer=DMX mixer
chkDisableHTP=Disable "Highest takes precedence" (HTP) mixing
chkRestrictValues=Let DDFs limit channel values (MinValue/MaxValue)
cmdOk=OK
cmdCancel=Cancel
[frmConfigDevice]
frmConfigDevice.Caption=Configure device
frmConfigDevice.mnuIcons.Caption=icons
Frame1=Icon
cmdChangeImage=Change picture
cmdDeleteImage=Reset picture
Label6=Device:
Label1=Name:
Label2=Address:
Label4=Color list:
Label7=Color gel:
cmdChangeColor=Change
Label3=Gobo list:
Label5=Dimmer:
chkSecondaryGrandMaster=Secondary grandmaster
fraPan=Pan
chkPanInvert=Invert
lblPanOffset=Offset:
lblPanScale=Scale:
fraTilt=Tilt
chkTiltInvert=Invert
lblTiltOffset=Offset:
lblTiltScale=Scale:
cmdOK=OK
cmdCancel=Cancel
[frmCopyReplayList]
frmCopyReplayList.Caption=Copy cue list
lblHelp=For every cue, decide whether it should be copied or referenced.
Frame1=Cue selection
cmdCloneAll=Link all
cmdCopyAll=Copy all
cmdInvert=Invert
cmdOk=OK
cmdCancel=Cancel
[frmDevices]
frmDevices.Caption=Devices
frmDevices.mnuPopUpStageAddDevice.Caption=add device
cmdConfig=Configure
cmdExportClipboard=Copy to clipboard
[frmDeviceSelection]
frmDeviceSelection.Caption=Group selection
lblName=Name:
[frmDMXInRemote]
frmDMXInRemote.Caption=DMX-In remote
frmDMXInRemote.cmbBank.List(0)=standard bank
chkActive=DMX-In Remote active
Label1=Selected bank:
lblLastCommand=Channel: ???; Value: ???
[frmDMXInRemoteConfig]
frmDMXInRemoteConfig.Caption=Configure DMX-In remote
frmDMXInRemoteConfig.mnuPopUp1Recieve.Caption=receive
frmDMXInRemoteConfig.mnuPopUp1Relative.Caption=relative
frmDMXInRemoteConfig.mnuPopUp1Send.Caption=transfer
frmDMXInRemoteConfig.mnuPopup2Button.Caption=nnop
frmDMXInRemoteConfig.mnuPopup2Toggle.Caption=switch
Label1=Soft patch:
Label3=Selected bank:
cmdInsert=Add
cmdRename=Rename
cmdDelete=Delete
cmdOK=OK
cmdCancel=Cancel
[frmEditColorlist]
frmEditColorlist.Caption=Edit color list
Label1=Color list:
cmdAddList=Add
cmdRename=Rename
cmdDelList=Delete
[frmEditGobolist]
frmEditGobolist.Caption=Edit gobo list
Label1=Gobo list:
cmdAddList=Add
cmdRename=Rename
cmdDelList=Delete
[frmEffects]
frmEffects.Caption=Chasers Tool
frmEffects.cmdReset.ToolTipText=Reset
frmEffects.Label1(0).Caption=play mode:
frmEffects.Label1(1).Caption=define command:
frmEffects.Label10.Caption=Priority (0 = none):
frmEffects.Label8.Caption=category:
frmEffects.chkAdvSettings.Caption=enhanced settings...
frmEffects.chkEditEffectEndCmd.Caption=at stopping
frmEffects.chkEditEffectStartCmd.Caption=at start
Label4=Chaser:
Label5=Step:
Label3=Chaser name:
lblGroupinfo=(Group names in parenthesis)
Label1=Play mode:
frmEffects.cmbPlaymode.List(0)=Manual
frmEffects.cmbPlaymode.List(1)=Normal
frmEffects.cmbPlaymode.List(2)=Reverse
frmEffects.cmbPlaymode.List(3)=Bounce
frmEffects.cmbPlaymode.List(4)=Random
frmEffects.cmbPlaymode.List(5)=Only one step
chkRepeat=Repeat
chkSound2Light=Beat-triggered
Label7=each . beat
chkIgnoreSpeedmaster=Ignore global speedmaster
Label6=Step name:
chkActive=Active:
lblFadeIn=Fade-in time:
lblDuration=Duration:
cmdForAllFadeIn=Set Fade-in time for all steps
cmdForAllDuration=Set duration for all steps
fraPlayBackControl=Play (selected chaser)
cmdNextStep=Execute next step
Label9=Intensity:
Label2=Speed boost:
chkSpeedGrouped=Grouped
chkIntensityGrouped=Grouped
fraEdit=Chasers management
fraEffect=Chaser
fraStep=Step
fraPlayBackControlAll=Play (all)
cmdStopAll=Stop all chasers
chkOnlyOne=Execute only one chaser per group
chkUseLastValues=Start fade from last values
chkLockUntilDone=Start only if no other is running
[frmFormParser]
frmFormParser.chkShowInfo.ToolTipText=Show help
frmFormParser.cmdClose.ToolTipText=Close
frmFormParser.chkStayOpen.ToolTipText=Keep window open
frmFormParser.cmdMove.ToolTipText=Click and hold to move
frmFormParser.ch2Ctl(0).Caption=Off
[frmGrandMaster]
frmGrandMaster.Caption=Masters
cmdSetAsValues=Grand
frmGrandMaster.cmdSetAsValues.ToolTipText=Set values as output and reset grandmaster
Label1=Grand
Label3=Grand 2
Label2=Flash
Label5=Speed
[frmGraphical]
frmGraphical.Caption=Graphical view
Label1=Zoom:
Label2=Coordinates:
frmGraphical.optMode(0).ToolTipText=Selection mode
frmGraphical.optMode(1).ToolTipText=Move mode
frmGraphical.chkFreezed.ToolTipText=Freeze
frmGraphical.mnuPopUpDevice.Caption=PopUp Device
frmGraphical.mnuPopUpDeviceConfig.Caption=Configure
frmGraphical.mnuPopUpDeviceConfigDelete.Caption=Delete
frmGraphical.mnuPopUpDeviceConfigMove.Caption=Move
frmGraphical.mnuPopUpDeviceConfigTab.Caption=Tab
frmGraphical.mnuPopUpStage.Caption=Popup Stage
frmGraphical.mnuPopUpStageAddDevice.Caption=Add device
frmGraphical.mnuPopUpStageChangeBackground.Caption=Change background picture
frmGraphical.mnuPopUpStageMoveMode.Caption=Device positioning mode
frmGraphical.tabViews.Tabs(1).Caption=default
frmGraphical.cmdReset.ToolTipText=reset
frmGraphical.mnuPopUpDeviceConfigPin.Caption=prefer graf. view
frmGraphical.mnuPopUpStageRasterize.Caption=adjust at grid
[frmJoystick]
frmJoystick.Caption=Joystick control
optActiveDevice(0)=Joysticks
optActiveDevice(1)=Serial mouse/trackball
frmJoystick.cmbJoystick.List(0)=Joystick 1
frmJoystick.cmbJoystick.List(1)=Joystick 2
frmJoystick.cmbJoystick.List(2)=Joystick 3
frmJoystick.cmbJoystick.List(3)=Joystick 4
[frmJoystickConfig]
frmJoystickConfig.Caption=Joystick configuration
frmJoystickConfig.cmbJoystick.List(0)=Joystick 1
frmJoystickConfig.cmbJoystick.List(1)=Joystick 2
frmJoystickConfig.cmbJoystick.List(2)=Joystick 3
frmJoystickConfig.cmbJoystick.List(3)=Joystick 4
frmJoystickConfig.cmbAxisMods(0).List(0)=Absolute
frmJoystickConfig.cmbAxisMods(0).List(1)=Relative
frmJoystickConfig.cmbAxisMods(1).List(0)=Absolute
frmJoystickConfig.cmbAxisMods(1).List(1)=Relative
frmJoystickConfig.cmbAxisMods(2).List(0)=Absolute
frmJoystickConfig.cmbAxisMods(2).List(1)=Relative
frmJoystickConfig.cmbAxisMods(3).List(0)=Absolute
frmJoystickConfig.cmbAxisMods(3).List(1)=Relative
Frame1=Relative mode
Label4=Dead zone (%):
Label5=Speedup:
cmdOK=OK
cmdCancel=Cancel
[frmKeyboard]
frmKeyboard.Caption=Keyboard control
chkActive=Keyboard hook active
chkGlobal=Global
chkSuppressKeys=Suppress used keys
[frmKeyboardConfig]
frmKeyboardConfig.Caption=Keyboard configuration
cmdOK=OK
cmdCancel=Cancel
[frmMain]
frmMain.Caption=DMXControl
frmMain.chkBlackout.Caption=Blackout
frmMain.chkFreeze.Caption=Freeze
frmMain.mnuFilePackAndGo.Caption=Pack && Go...
mnuFile=File
mnuFileNew=New project...
mnuFileOpen=Open project...
mnuFileSave=Save project
mnuFileSaveAs=Save project as...
mnuFileExit=Exit
mnuWindows=Window
mnuStateEdit=Edit view
mnuConfig=Settings
mnuConfigTransmitter=Output plugins...
mnuConfigPlugins=Plugins...
mnuConfigProgram=Program settings...
mnuConfigMidiRemote=MIDI remote control...
mnuDMXInRemote=DMX-In remote control...
mnuConfigJoystick=Joystick control...
mnuConfigKeyboard=Keyboard control...
mnuConfigColorLists=Color lists...
mnuConfigGoboLists=Gobo lists...
mnuConfigShapes=Shape editor...
mnuShowExperimental=Enable experimental tools
mnuHelp=?
mnuHelpShowHelp=Help...
mnuHelpShowHP=DMXControl web site
mnuHelpShowForum=DMXControl forum
mnuHelpAbout=About...
frmMain.tbTools.Buttons(1).ToolTipText=New project...
frmMain.tbTools.Buttons(2).ToolTipText=Open project...
frmMain.tbTools.Buttons(3).ToolTipText=Save project
frmMain.tbTools.Buttons(5).ToolTipText=Blackout on/off
frmMain.tbTools.Buttons(6).ToolTipText=Freeze/Unfreeze output
frmMain.tbTools.Buttons(7).ToolTipText=Stop audio output
frmMain.tbTools.Buttons(9).ToolTipText=Graphical view
frmMain.tbTools.Buttons(10).ToolTipText=Channel overview
frmMain.tbTools.Buttons(11).ToolTipText=Master
frmMain.tbTools.Buttons(12).ToolTipText=Submaster
frmMain.tbTools.Buttons(14).ToolTipText=Effect sequencer
frmMain.tbTools.Buttons(15).ToolTipText=Cue list
frmMain.tbTools.Buttons(16).ToolTipText=Command Box
frmMain.tbTools.Buttons(17).ToolTipText=Audio Player
frmMain.tbTools.Buttons(18).ToolTipText=Textbook
frmMain.tbTools.Buttons(20).ToolTipText=Sound Analyzer
frmMain.tbTools.Buttons(21).ToolTipText=Beat Tool
mnuHelpShowDebug=Show debug output
mnuShowRepository=Show cue library
mnuWindowsToZero=Move all windows to primary screen
[frmMidiRemote]
frmMidiRemote.Caption=MIDI Remote
chkActive=MIDI remote active
Label1=Selected bank:
lblLastCommand=Message: 0x??; Data 1: ???; Data 2: ???
[frmMidiRemoteConfig]
frmMidiRemoteConfig.Caption=Configure MIDI remote
frmMidiRemote.cmbBank.List(0)=Standardbank
frmMidiRemoteConfig.mnuPopup2Button.Caption=nnop
frmMidiRemoteConfig.mnuPopup2Toggle.Caption=switch
Label1=MIDI-in port:
Label2=MIDI-out port:
chkMidiLearn=MIDI learn
Label3=Selected bank:
cmdInsert=Add
cmdRename=Rename
cmdDelete=Delete
cmdOK=OK
cmdCancel=Cancel
mnuPopUp1Recieve=Receive
mnuPopUp1Relative=Relative
mnuPopUp1Send=Transmit
lblLastCommand=Message: 0x??; Data 1: ???; Data 2: ???
[frmPDARemote]
frmPDARemote.Caption=PDA Remote control
Label1=COM port:
Label2=Baud rate:
Label3=Server port:
Label4=Status:
frmPDARemote.cmbCOM.List(0)=<Disabled>
fraSerial=Serial connection (Bluetooth)
fraTCP=Network connection (WLAN)
[frmManageLists]
frmManageLists.Caption=Manage lists
frmManageLists.cmdExport.Caption=export
lblHelp=Use this tool to manage lists. Select a list on left side and then click a button.
fraList=Lists
cmdAdd=Add
cmdCopy=Copy
cmdDelete=Delete
cmdRename=Rename
cmdDown=Down
cmdUp=Up
cmdOk=OK
mnuActionAdd=Add...
mnuActionCopy=Copy
mnuActionManage=Manage...
mnuActionRemove=Delete
mnuActionRename=Rename...
[frmRepositorys]
frmRepositorys.Caption=Select cue from library
Label1=Search:
chkSort=Sort in alphabetical order
cmdOk=OK
cmdCancel=Cancel
mnuPopupSceneTypesRepository=From library
[frmSaveChannels]
frmSaveChannels.Caption=Save channels
frmSaveChannels.mnuPopUpAdd.Caption=add scene object
frmSaveChannels.mnuPopUpAddCommand.Caption=command
frmSaveChannels.mnuPopUpAddMacro.Caption=macro
frmSaveChannels.mnuPopUpAddRepository.Caption=scene from repository
frmSaveChannels.mnuPopUpAddScene.Caption=new scene
chkAutoExpand=Expand automatically
cmdCancel=Cancel
cmdOk=OK
lblHelp=Select all channels to be assigned to the object:
[frmScene_Audio]
frmScene_Audio.Caption=Audio cue
frmScene_Audio.Label3.Caption=channel nb.:
frmScene_Audio.Label4.Caption=Options:
frmScene_Audio.chkRepeat.Caption=repeat playing
frmScene_Audio.cmbChannel.List(0)=channel 1
frmScene_Audio.cmbChannel.List(1)=channel 2
frmScene_Audio.cmbChannel.List(10)=channel 11
frmScene_Audio.cmbChannel.List(11)=channel 12
frmScene_Audio.cmbChannel.List(12)=channel 13
frmScene_Audio.cmbChannel.List(13)=channel 14
frmScene_Audio.cmbChannel.List(14)=channel 15
frmScene_Audio.cmbChannel.List(15)=channel 16
frmScene_Audio.cmbChannel.List(2)=channel 3
frmScene_Audio.cmbChannel.List(3)=channel 4
frmScene_Audio.cmbChannel.List(4)=channel 5
frmScene_Audio.cmbChannel.List(5)=channel 6
frmScene_Audio.cmbChannel.List(6)=channel 7
frmScene_Audio.cmbChannel.List(7)=channel 8
frmScene_Audio.cmbChannel.List(8)=channel 9
frmScene_Audio.cmbChannel.List(9)=channel 10
frmScene_Audio.fraSettings.Caption=scene settings
frmScene_Audio.lblInfo.Caption=Audio scenes can not used for playing sounds during a theater performance. By channel nb. you can abort audio scenes per command. You can assign arbirtrary audio scenes to a channel.
Label1=Audio file:
Label2=Name:
Label8=Duration:
chkStopAfterWait=Stop playback after playing
cmdCancel=Cancel
cmdOk=OK
[frmScene_Composition]
frmScene_Composition.Caption=Composite cue
frmScene_Composition.mnuPopUpAdd.Caption=add scene object
frmScene_Composition.mnuPopUpAddCommand.Caption=command
frmScene_Composition.mnuPopUpAddMacro.Caption=macro
frmScene_Composition.mnuPopUpAddRepository.Caption=scene from repository
frmScene_Composition.mnuPopUpAddScene.Caption=new scene
Label2=Description:
Label3=No fade takeover:
Label6=Name:
Label7=Fade-in time:
Label8=Duration:
cmdOk=OK
cmdCancel=Cancel
frmControls=Default settings for this cue
[frmScene_Moving]
frmScene_Moving.Caption=Motion cue
frmScene_Moving.chkReverse.Caption=play in reverse mode
frmScene_Moving.chkSequentialOffset.Caption=sequential offset
Frame1=Cue settings
Label13=Cue name:
Label3=Shape:
cmdShapeEditor=Shape editor
Label12=Duration:
Label8=Repetitions:
Label11=Wait time:
frmDevices=Devices
frmParameters=Selected device
Label4=X offset:
Label5=Y offset:
Label6=X size:
Label10=Y size:
chkSwapXY=Swap x and y channel assignments
Label7=Offset in steps:
Label1=Invert:
Label2=Starting position:
chkStartBehaviour(0)=Absolute
chkStartBehaviour(1)=Relative
Frame3=Assigned cues
chkTestScene=Try cue
cmdOk=OK
cmdCancel=Cancel
chkBeatTriggered=Beat-triggered
frmScene_Moving.chkFan.Caption=FAN
[frmScene_Simple]
frmScene_Simple.chkAutoRecall.Caption=Auto recall
frmScene_Simple.cmbCategory.Text=Dir1/Dir2/Category
frmScene_Simple.cmdAll.Caption=All
frmScene_Simple.cmdClear.Caption=Clear
frmScene_Simple.cmdRecall.Caption=Recall
frmScene_Simple.cmdStore.Caption=Store
frmScene_Simple.mnuPopUpAdd.Caption=add scene object
frmScene_Simple.mnuPopUpAddCommand.Caption=command
frmScene_Simple.mnuPopUpAddMacro.Caption=Macro
frmScene_Simple.mnuPopUpAddRepository.Caption=scene from repository
frmScene_Simple.mnuPopUpAddScene.Caption=new scene
[frmOutput]
frmOutput.Caption=Output plugins
frmOutput.cmdPluginAdministrator.Caption=approve plugins for use without administrator rights
Label1=Installed plugins:
cmdConfig=Configure selected plugin
[frmPickColor]
frmPickColor.Caption=Select color
cmdOK=OK
cmdCancel=Cancel
[frmPlugins]
frmPlugins.Caption=Application plugins
frmPlugins.cmdPluginAdministrator.Caption=approve plugins for user without administrator rights
Label1=Installed plugins:
cmdConfig=Configure selected plugin
[frmPackAndGoOptions]
frmPackAndGoOptions.Caption=select Pack & Go-elements
frmPackAndGoOptions.Frame1.Caption=Pack && Go-elements
frmPackAndGoOptions.chkAudioplayerTracks.Caption=Audio files of audio player tracks
frmPackAndGoOptions.chkButtonsIcons.Caption=icons of command box
frmPackAndGoOptions.chkDDFs.Caption=device definitions
frmPackAndGoOptions.chkGraphicalViewImages.Caption=background picture graf. view
frmPackAndGoOptions.chkProjectfiles.Caption=projekt files
frmPackAndGoOptions.chkSettings.Caption=configuration file
frmPackAndGoOptions.cmdCancel.Caption=abort
frmPackAndGoOptions.cmdOk.Caption=OK
frmPackAndGoOptions.lblHelp.Caption=select elemente that should be inserted into Pack && Go-archive
[frmRecorder]
frmRecorder.Caption=DMX recorder
frmRecorder.cmdStart.Caption=Start
frmRecorder.cmdStop.Caption=Stop
[frmRepositorys]
frmRepositorys.mnuPopupSceneTypes.Caption=Scene types
frmRepositorys.mnuPopupSceneTypesAutoGen.Caption=automatically created
frmRepositorys.mnuPopupSceneTypesAutoGenChaser.Caption=chaser
frmRepositorys.mnuPopupSceneTypesAutoGenDDF.Caption=from DDF
frmRepositorys.mnuPopupSceneTypesItem(0).Caption=Item 0
[frmSaveCommand]
frmSaveCommand.Caption=Edit command
frmSaveCommand.Label(0).Caption=flags:
frmSaveCommand.Label(1).Caption=TIPP: Use the command "Effect -> <Effect name> -> Start/Stop" with option "use fade time" and "set fade-nn value to 0", in order to integrate effects e.g. into audioplayer tracks.)
frmSaveCommand.chkAskValue.Caption=get value
frmSaveCommand.chkFadeInValue.Caption=during Fade-in value increase)
frmSaveCommand.chkFadeInValueRev.Caption=during Fade-nn value decrease)
frmSaveCommand.chkIgnoreZero.Caption=ignore value 0
frmSaveCommand.chkOverride.Caption=apply given value:
frmSaveCommand.chkResetAfterFadeIn.Caption=set to 0 after Fade-in
frmSaveCommand.chkToggle.Caption=toggle mode
frmSaveCommand.chkUseFadeIn.Caption=use fade in time
frmSaveCommand.fraCommand.Caption=command
frmSaveCommand.fraSettingsEx.Caption=settings
frmSaveCommand.lblHelp.Caption=with commands you can control many functions of DMXControl remotely or integrate into scenes
cmdOk=OK
cmdCancel=Cancel
[frmScene_Simple]
frmScene_Simple.Caption=Save cue
frmControls=Default settings for this cue
Label6=Cue name:
Label7=Fade-in time:
Label8=Duration:
Label3=No fade takeover:
Label2=Description:
Label1=HINT: These are only the default settings that are stored in the cue library. The name and the fade-in times can be changed independently in the respective part of the program.
Frame1=Legend
Check1=Do not save / Remove
Check2=Save / Update
Check3=Keep saved value
chkSaveAll=Save all (not recommended)
chkAutoExpand=Auto expand
cmdOk=OK
cmdCancel=Cancel
Label4=Value [Byte]:
Label5=Value [%]:
Label9=Category:
lblHelp=Select all channels to store in this cue:
frmScene_Simple.txtSearch.Text=Enter search text...
[frmScenes]
frmScenes.Caption=Cue list
frmScenes.cmdReset.ToolTipText=Reset
frmScenes.cmdScrollToActiveScene.ToolTipText=scroll to active scene
frmScenes.lblDragDrop.Caption=DragDrop label
frmScenes.mnuPopUpSceneEntryColor.Caption=set color...
chkWithFadeIn=Use Fade-in time on double click
frmScenes.chkRepeat.ToolTipText=Repeat
cmdGo=G O !
frmScenes.cmdManage.Caption=Manage
[frmSceneGeneratorChaser]
frmSceneGeneratorChaser.Caption=chaser wizard
frmSceneGeneratorChaser.Label(0).Caption=step 1: select device
frmSceneGeneratorChaser.Label(1).Caption=select all devices with check mark, that to be integrated into the chaser. Only dimmer channels are shown.)
frmSceneGeneratorChaser.Label(10).Caption=scenes are created...)
frmSceneGeneratorChaser.Label(11).Caption=Dimmer value (off):)
frmSceneGeneratorChaser.Label(2).Caption=step 2: define pattern
frmSceneGeneratorChaser.Label(3).Caption=select one of pre-defined pattern or define your own one.)
frmSceneGeneratorChaser.Label(4).Caption=step 3: Additional settings
frmSceneGeneratorChaser.Label(5).Caption=select the brightness and set the names of created scenes
frmSceneGeneratorChaser.Label(6).Caption=Dimmervalue (on):
frmSceneGeneratorChaser.Label(7).Caption=Basic name of scenes:
frmSceneGeneratorChaser.Label(8).Caption=Ready!
frmSceneGeneratorChaser.Label(9).Caption=Your scenes are generated now ...)
frmSceneGeneratorChaser.Label1.Caption=preview-speed:
frmSceneGeneratorChaser.cmbPattern.List(0)=pattern 1
frmSceneGeneratorChaser.cmbPattern.List(1)=pattern 2
frmSceneGeneratorChaser.cmbPattern.List(10)=pattern 11
frmSceneGeneratorChaser.cmbPattern.List(11)=pattern 12
frmSceneGeneratorChaser.cmbPattern.List(12)=pattern 13
frmSceneGeneratorChaser.cmbPattern.List(13)=pattern 14
frmSceneGeneratorChaser.cmbPattern.List(14)=pattern 15
frmSceneGeneratorChaser.cmbPattern.List(15)=pattern 16
frmSceneGeneratorChaser.cmbPattern.List(2)=pattern 3
frmSceneGeneratorChaser.cmbPattern.List(3)=pattern 4
frmSceneGeneratorChaser.cmbPattern.List(4)=pattern 5
frmSceneGeneratorChaser.cmbPattern.List(5)=pattern 6
frmSceneGeneratorChaser.cmbPattern.List(6)=pattern 7
frmSceneGeneratorChaser.cmbPattern.List(7)=pattern 8
frmSceneGeneratorChaser.cmbPattern.List(8)=pattern 9
frmSceneGeneratorChaser.cmbPattern.List(9)=pattern 10
frmSceneGeneratorChaser.cmdBack.Caption=< back
frmSceneGeneratorChaser.cmdCancel.Caption=abort
frmSceneGeneratorChaser.cmdDown.Caption=down
frmSceneGeneratorChaser.cmdNext.Caption=continue >
frmSceneGeneratorChaser.cmdOk.Caption=Finishing
frmSceneGeneratorChaser.cmdUp.Caption=up
frmSceneGeneratorChaser.fraPreview.Caption=preview
frmSceneGeneratorChaser.optPatternSource(0).Caption=Integrated pattern
[frmSceneGeneratorDDF]
frmSceneGeneratorDDF.Caption=create scenes from DDF
frmSceneGeneratorDDF.Label(0).Caption=step 1: select device
frmSceneGeneratorDDF.Label(1).Caption=select the device, you want to create automatic scenes for.
frmSceneGeneratorDDF.Label(10).Caption=scenes are generated...)
frmSceneGeneratorDDF.Label(2).Caption=step 2: selectvalue
frmSceneGeneratorDDF.Label(3).Caption=found controls:
frmSceneGeneratorDDF.Label(4).Caption=step 3: additional settings
frmSceneGeneratorDDF.Label(6).Caption=additional devices:
frmSceneGeneratorDDF.Label(7).Caption=Basis-Name of scenes:
frmSceneGeneratorDDF.Label(8).Caption=Ready!
frmSceneGeneratorDDF.Label(9).Caption=your scenes are created now ...
frmSceneGeneratorDDF.Label1.Caption=contained values:
frmSceneGeneratorDDF.cmdBack.Caption=< back
frmSceneGeneratorDDF.cmdCancel.Caption=abort
frmSceneGeneratorDDF.cmdDown.Caption=down
frmSceneGeneratorDDF.cmdNext.Caption=continue >
frmSceneGeneratorDDF.cmdOk.Caption=Finishing
frmSceneGeneratorDDF.cmdUp.Caption=up
[frmScheduler]
frmScheduler.Caption=Scheduler
frmScheduler.chkActive.Caption=Scheduler active
[frmSchedulerEntry]
frmSchedulerEntry.Caption=Plan a task
frmSchedulerEntry.Label1.Caption=Every week on
frmSchedulerEntry.Label10.Caption=On
frmSchedulerEntry.Label2.Caption=On each day of month)
frmSchedulerEntry.Label3.Caption=Execution:
frmSchedulerEntry.Label4.Caption=Every day
frmSchedulerEntry.Label5.Caption=Execution
frmSchedulerEntry.Label6.Caption=Execution time
frmSchedulerEntry.Label7.Caption=Repeat all h:m:s:ct
frmSchedulerEntry.Label8.Caption=Minimal all h:m:s:ct
frmSchedulerEntry.Label9.Caption=Maximal all=h:m:s:ct
frmSchedulerEntry.chkActive.Caption=active
frmSchedulerEntry.chkLater.Caption=execute later
frmSchedulerEntry.chkWeeklyDay(0).Caption=Monday
frmSchedulerEntry.chkWeeklyDay(1).Caption=Tuesday
frmSchedulerEntry.chkWeeklyDay(2).Caption=Wednesday
frmSchedulerEntry.chkWeeklyDay(3).Caption=Thursday
frmSchedulerEntry.chkWeeklyDay(4).Caption=Friday
frmSchedulerEntry.chkWeeklyDay(5).Caption=Saturday
frmSchedulerEntry.chkWeeklyDay(6).Caption=Sonday
frmSchedulerEntry.cmbDateStartMode.List(0)=daily
frmSchedulerEntry.cmbDateStartMode.List(1)=weekly
frmSchedulerEntry.cmbDateStartMode.List(2)=monthly
frmSchedulerEntry.cmbDateStartMode.List(3)=singular
frmSchedulerEntry.cmbTimeStartMode.List(0)=certain time
frmSchedulerEntry.cmbTimeStartMode.List(1)=repeatly
frmSchedulerEntry.cmbTimeStartMode.List(2)=randomly
frmSchedulerEntry.cmdCancel.Caption=Abort
frmSchedulerEntry.cmdOk.Caption=OK
frmSchedulerEntry.fraCommand.Caption=Command
frmSchedulerEntry.fraDate.Caption=Date
frmSchedulerEntry.fraDateMode(0).Caption=daily execution
frmSchedulerEntry.fraDateMode(1).Caption=weekly execution
frmSchedulerEntry.fraDateMode(2).Caption=monthly execution
frmSchedulerEntry.fraDateMode(3).Caption=single execution
frmSchedulerEntry.fraTime.Caption=time
frmSchedulerEntry.fraTimeMode(0).Caption=certain time
frmSchedulerEntry.fraTimeMode(1).Caption=repeatly
frmSchedulerEntry.fraTimeMode(2).Caption=randomly
frmSchedulerEntry.Label11.Caption=Name of task:
frmSchedulerEntry.Label12.Caption=earliest execution time:
frmSchedulerEntry.Label13.Caption=laest execution time
frmSchedulerEntry.Label14.Caption=each with
frmSchedulerEntry.cmbDateStartMode.List(4)=nonrecurring
frmSchedulerEntry.cmbTimeStartMode.List(3)=randomly repeated
frmSchedulerEntry.fraDateMode(4).Caption=nonrecurring execution
frmSchedulerEntry.fraTimeMode(3).Caption=randomly repeated
[frmShapeEditor]
frmShapeEditor.Caption=Shape editor
frmShapeEditor.cmdReverseCopy.Caption=repeat backwards
lblFigur=Shape:
cmdAddList=Add
cmdRename=Rename
cmdDelList=Delete
chkShowNumbers=Show numbering
cmdDeleteAll=Remove all points
frmCreateShape=Create shapes
lblResolution=Resolution:
lblSteps=steps
cmdSave=Save
cmdCancel=Cancel
chkDeletePoints=Delete points
frmShapeEditor.cmbShape.List(0)=Circle
frmShapeEditor.cmbShape.List(1)=Sinus
frmShapeEditor.cmbShape.List(2)=Spiral
frmShapeEditor.cmbShape.List(3)=Random
cmdAddPoints=Create shape
[frmSplash]
frmSplash.lblLoad.Caption=Loading...
frmSplash.lblLong.Caption=DMX Show Control Software
[frmSubMaster]
frmSubMaster.Caption=Submaster
Label1=Bank name:
frmSubMaster.cmbFlashMode.List(0)=Normal
frmSubMaster.cmbFlashMode.List(1)=On/Off
frmSubMaster.cmbFlashMode.List(2)=Only one enabled
cmdFlashAll=All
frmSubMaster.cmbLayout.List(0)=Simple view
frmSubMaster.cmbLayout.List(1)=Crossfade view
fraBanks=Submaster banks
fraCrossfade=Fade
cmdCopyA=Copy A to B
cmdCopyB=Copy B to A
fraAutofade=Automatic fading
lblAutofadeDuration=1 second(s)
fraSettings=Flash mode
Label5=Bank A
Label6=Bank B
cmdAutoA=Auto A
cmdAutoB=Auto B
frmSubMaster.cmdReset.ToolTipText=Reset
fraBankA=Bank A
fraBankB=Bank B
lblInfo=Click here to assign devices or commands ->
mnuModeChannels=Channels
mnuModeCommand=Command
[frmStatus]
frmStatus.Caption=status
frmStatus.cmdCancel.Caption=abort
[frmTimecodePlayer]
frmTimecodePlayer.Caption=Timecode player
fraSettings=Configuration
Label3=MIDI-in port:
fraTimecode=Timecode
Label1=Sequence:
chkActive=Active
cmdManage=Manage
frmTimecodePlayer.cmdReset.ToolTipText=Reset
[frmWinamp]
frmWinamp.Caption=Sound analyzer
frmWinamp.lblBeatMode.Caption=Beats from:
frmWinamp.lblOutputMode.Caption=Output:
frmWinamp.optOutputMode(0).Caption=All equal
frmWinamp.optOutputMode(1).Caption=VU-Meter
lblInfo=Click on a bar to assign a device. Open the URL "linein://" in Winamp to use an external audio source.
chkActive=Sound2Light on
Label1=Beat:
optMode(0)=VU
optMode(1)=Analyzer
optSource(0)=VBVis Plugin
optSource(1)=AVS
chkCompressor=Raise spectrum to
cmdCorrectionCurve=Edit channel settings
lblMode=Mode
lblSource=Source
chkTrigger=Threshold at 100%
chkFullOn=Set to 255 when above threshold
frmWinamp.lblVUGain.ToolTipText=AutoGain
frmWinamp.sldCompMax.ToolTipText=Lifting threshold
frmWinamp.sldTrigger.ToolTipText=Lifting threshold
frmWinamp.sldTriggerOnValue.ToolTipText=Lifting threshold
[frmWinampCorrectionSliders]
frmWinampCorrectionSliders.Caption=Correction curve
fraCorrection=Correction curve (Draw with pressed left mouse button)
Frame1=Ignore trigger level
cmdOK=OK
[frmTextbook]
frmTextbook.Caption=Textbook
frmTextbook.cmdSearchDown.Caption=next hit
frmTextbook.lblNoMoreHits.Caption=No (other) hit identified!
frmTextbook.lblSearch.Caption=search:
cmdSaveTextbook=Save to RTF file
fraTextEditor=Text editor
Label1=Textbook:
Label2=Text file:
cmdPrevEntry=Prev
cmdNextEntry=Next
cmdGo=GO
chkAutoScroll=AutoScroll
cmdOpenFile=Open
chkTextLock=Lock for changes
cmdManage=Manage
frmTextbook.cmdReset.ToolTipText=Reset
[frmDebugger]
frmDebugger.Caption=Debug output
frmDebugger.cmdClear.Caption=Clear
frmDebugger.cmdSave.Caption=Save...
